AGFA CR 75.0, Reference Manual, Page: 76 / 102

76
2241A EN 20040210
Preventive maintenance
The CR 75.0 is designed for trouble-free service. Maintenance and cleaning
involve only some minor user tasks.
Safety guidelines
•
Do not lubricate the Digitizer.
•
Do not attempt to disassemble the Digitizer.
•
Always switch off the CR 75.0 and disconnect the power cord from the outlet
before carrying out any cleaning work.
Cleaning the exterior
#
Do not open the machine for cleaning. No components inside the
machine require maintenance or cleaning by the user.
1
Switch off the Digitizer by following the procedure as described in ‘Switching
off the CR 75.0’ on page 25 .
2
Remove the power plug from the socket.
3
Wipe the exterior of the Digitizer with a clean, soft, damp cloth.
Use a mild soap or detergent if required but never use an ammonia–based cleaner.
Be careful not to get any liquid in the power cord port.
4
Plug in the Digitizer and switch it on by following the procedure as described
in
‘Switching on the CR 75.0’ on page 23 .
Interval What to do? Page
Ad hoc ‘Cleaning the exterior’ 76
To prevent damage to the Digitizer while cleaning, observe the following
safety precautions:
Take extreme care that no water infiltrates the machine !