AGFA CR 75.0, Reference Manual, Page: 23 / 102

23
2241A EN 20040210
Switching on the CR 75.0
Before switching on
Make sure that the following conditions are met before you switch the CR 75.0
on:
•
A service technician has appropriately connected the CR 75.0 and has carried
out a performance test.
•
You have read the safety precautions at the beginning of this manual and you
will observe them while working with the CR 75.0.
•
You are acquainted with the basic functions of the Digitizer.
Switching on the CR 75.0
Locate the main switch and place it in position ‘ON’.
After the Digitizer has been switched on, the following screen is displayed:
The CR 75.0 executes a self-test, initializes all the Digitizer components, goes
through a start-up procedure and checks for cassettes, image plates and images
still to be transmitted in the image queue. During this stage, the status indicator is
red and flashing.
WAIT
Self test proceeding