AGFA 6005/100 6005/200 User Manual Download Page 10

Page: 10 / 83

Intended Use

The FLFS DR Retrofit System will be used in a radiological environment by

qualified staff to read-out, process and route static X-ray radiographic images.
The system is intended to support acquisition of FLFS images in an X-ray

system.

Intended User

This manual is written for trained users of Agfa products and trained clinical

personnel. Users are considered as the persons who actually handle the

equipment as well as the persons having authority over the equipment. Before

attempting to work with this equipment, the user must read, understand, note

and strictly observe all warnings, cautions and safety markings on the

equipment.

| Full Leg Full Spine DR Retrofit System | Introduction to the Full Leg Full Spine application

0326A EN 20211014 1141

Summary of Contents for 6005/100 6005/200




















































































Search results

Summary of Contents for 6005/100 6005/200

Reviews:

Related manuals for 6005/100 6005/200

Brands by name

Popular brands

AGFA 6005/100 6005/200, User Manual

Search results

Summary of Contents for 6005/100 6005/200

Reviews:

Related manuals for 6005/100 6005/200

Brands by name

Popular brands