31
2386G EN 20120110
Introduction
CR 30-X/CR 30-X
M
•
If you notice conspicuous noise or smoke, disconnect the digitizer
immediately.
•
Do not pour water or any other liquid over the device.
•
The digitizer complies with the EN 60601-1 and UL 60601-1 standards for
Medical Electrical Equipment. This means that, although it is absolutely
safe, patients may not come in direct contact with the equipment.
Therefore the operator console must be placed outside a radius of 1.5 m
(EN) or 1,83 m (UL) around the patient (according to the local valid
regulation).
•
Perform no other operations on the digitizer than those described in this
document.
•
Switch the system off before moving it. When reaching the new position,
switch the system on again.
Patient environment
Patient environment
R = 1.5 m (1.83 m)
h= 2.5 m
(2.29 m)
Summary of Contents for 5175/200
Page 1: ...CR 30 X type 5175 200 5175 205 CR 30 Xm type 5179 100 User Manual m 2386G EN 20120110 ...
Page 58: ...58 2386G EN 20120110 Equipment Information Sheet CR 30 X CR 30 XM ...
Page 59: ...Remarks for HF emission and immunity Appendix B ...