manualshive.com logo in svg

AGCO LELY ATTIS PT 130, Operator'S Manual

Share
Download
AGCO LELY ATTIS PT 130 Operator'S Manual Download Page 37

3 Operation

3.1 First use

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39

3.1.1 Adjust the height of the drawbar pull eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.1.2 Adjust the film holder for other film roll sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.1.3 Adjust the bale end-tipper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

3.1.4 Adjust the bearings adjust plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

3.1.5 Adjust the film stretch  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

3.1.6 Adjust the film stretch  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

3.1.7 Program settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

3.2 Connect the machine to the tractor

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44

3.2.1 Connect the machine to the tractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

3.2.2 Calculate the maximum permitted vertical load on the coupling point . . . . . . . . . . . . . . 45

3.3 Transport position and driving

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

47

3.3.1 Transport position of the bale end tipper (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

3.3.2 Transport position of the loader arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

3.3.3 Place or remove the wheel chocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

3.4 Prepare the machine to wrap

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

50

3.4.1 Move to the working position. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

3.4.2 Replace a film roll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

3.5 Operate the machine

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

54

3.5.1 Before you operate the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

3.5.1.1 Start wrapping auto mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

3.5.1.2 Start wrapping manual mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

3.5.2 Before you start to wrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

3.5.3 Drive on slopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

3.5.4 Shut down procedure on the field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

3.6 Disconnect the machine from the tractor

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

57

3.6.1 Park the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

3.6.2 Remove the pressure from the hydraulic system.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

3.6.3 Take the machine out of operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Table of contents

Bale Wrapper 

37

4820.LE.EN01

Summary of Contents for LELY ATTIS PT 130



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands