AGCO LELY ATTIS PT 130, Operator'S Manual

Page: 39 / 98

3.1 First use
3.1.1 Adjust the height of the drawbar pull eye
WARNING: Risk of injury or death.
Before you make adjustments, you must turn the engine to OFF.
Procedure
1.
Remove the two fasteners from the drawbar
pull eye.
2.
You can turn the drawbar pull eye 180
degrees if necessary.
3.
Install the drawbar pull eye to the drawbar
with the two fasteners and tighten the
fasteners.
GUID-4CD6D309-2B58-4545-8489-602307CD96B1-high.jpg [High]
Fig. 1
3.1.2 Adjust the film holder for other film roll sizes
Procedure
1.
Remove the two fasteners (5) from the film
holder (3).
GUID-98F604A2-5986-430D-957F-B319B4D8FD8C-high.jpg [High]
Fig. 2
2.
Move the film holder (3) to the correct
position:
° Use the position (A) for 750 mm film.
° Use the position (B) for 500 mm film.
1 Fastener
2 Washer
3 Film holder
4 Washer
5 Fastener
A 750 mm film rolls
B 500 mm film rolls
3.
Install the two fasteners (5).
GUID-B474F697-2B13-4F5E-9FB6-457CFE271BBE-high.jpg [High]
Fig. 3
[V]
GUID-82508BE6-AED0-466D-B2E8-9945515E197E [V1]
GUID-442C2EFF-E278-46BD-B3A7-2E31933964D9 [V1]
3. Operation
Bale Wrapper 39
4820.LE.EN01