21
6. Installation of the Control
Use the supplied suction cup mount to position the monitor in the cab. Make sure the glass is clean
before installing the suction cup mount. If a non-cabbed tractor is used, use the supplied #10 screws
for installation on the fender. If unit is mounted on fender it will need to be removed at night and
stored in a clean, dry area. Use the Ram mount swivel-positioning nut to tighten the entire assembly.
Adjust it so that you can view the entire screen and be able to use the touch screen without interfering
with other tractor functions
7. Installation of Display Cable Harness
On the bottom of the touch screen display you will find the main display wire plug. The harness (006-
4660N) will need to be attached to this plug and run through the cab towards the hitch where it will
connect with its matching harness (006-4660L) from the PIP.
For AGCO part cross-reference visit: www.harvesttec.com/system.html
