AGCO Cumberland Flex-Flo 220, Installation Manual

Page: 12 / 26

3. Installation
12 PNEG-2339 Flex-Flo Unloader Kit
Installing the Slide Gate
1. Insert the slide (14) into the transfer plate (12). Install the slide shield (15) to the transfer plate (12)
using two 5/16" x 1" truss head screws (4) and 5/16" hex nuts (11). (See Figure 3E.)
NOTE: Make sure the slide (14) is in operating position. Pass the free end of the chain through the
slide shield (15) and secure it to the slide (14) with a cotter pin.
Figure 3E Installing the Slide and the Slide Shield
2. Install the unloader (23) to the transfer plate assembly (22) using 5/16" x 1" MS screws (5) and
5/16" hex nuts (11). (See Figure 3F.)
Figure 3F Installing the Unloader Assembly
Ref # Part # Description
4 S-4336
5/16"-18 x 1" Truss Head
Machine Screw
11 S-396 Hex Nut 5/16"-18 YDP Grade 2
12 BLK-10496 Transfer Plate
14 FLX-4782 Slide Gate
15 BLK-10497 Slide Gate Shield
Ref # Part # Description
5 S-8328
Screw, MS 5/16"-18 x 1" RHS ZN
Grade 2
11 S-396 Hex Nut 5/16"-18 YDP Grade 2
22 Transfer Plate Assembly
23 Unloader Assembly