AGCO Cumberland Flex-Flo 220, Installation Manual

Page: 11 / 26

3. Installation
PNEG-2339 Flex-Flo Unloader Kit 11
4. Install the boot (33) to the tank collar (32) using 5/16" x 1" truss head screws (4), 5/16" nylon washers
(6) and 5/16" nylon nuts (8). (See Figure 3C.)
NOTE: Install 5/16" x 1" screws (4) from the inside of the tank collar (32). Snug tighten the hardware.
Figure 3C Installing the Boot to the Tank Collar
5. Install the transfer plate (12) and unloader braces (13) to the boot (33) using 5/16" x 1" truss head
screws (4), 5/16" nylon washers (6) and 5/16" nylon nuts (8). (See Figure 3D.)
NOTE: Install 5/16" x 1" screws (4) from the inside of the boot (33). Snug tighten the hardware.
Figure 3D Installing the Transfer Plate and Unloader
Braces to the Boot
Ref # Part # Description
4 S-4336
5/16"-18 x 1" Truss Head
Machine Screw
6 S-4338 5/16" Nylon Washer
8 S-4337 5/16"-18 Nylon Insert Nut
32 Tank Collar
33 Boot
Ref # Part # Description
4 S-4336
5/16"-18 x 1" Truss Head
Machine Screw
6 S-4338 5/16" Nylon Washer
8 S-4337 5/16"-18 Nylon Insert Nut
12 BLK-10496 Transfer Plate
13 FLX-4819 Unloader Brace
33 Boot