37
15. Servicing the Aga 6-4
A. TO REMOVE HOTPLATE
1.
Isolate from electric supply.
2.
Remove pan supports and burner caps (
Fig. 15.1
)
3.
Remove burner fixing screws (14) and hotplate fixing
nuts (8).
4.
Lift off burner fixing rings (6).
5.
Lift off hotplate castings in the following order: left
hand, right hand and centre (
Fig. 15.2
).
NOTE
: Each hotplate casting has an earth lead. Each lead
must be disconnected before completely removing hotplate
casting (
Fig. 15.3
).
6.
Re-assemble in reverse order.
B.
TO REMOVE SIDE PANELS
1.
Isolate from electric supply.
2.
Lower the cooker onto the rollers by turning the
adjusting feet fully anti-clockwise.
NOTE
: It may be necessary to disconnect the flexible gas
connection to allow the cooker to be withdrawn from
between the kitchen units.
3.
Roll the cooker slightly forward, unhook the safety chain
and disconnect the flexible hose.
4.
Remove rear fixing screws (3) and slide side panel back
and out.
5.
Re-assemble in reverse order.
DESN 517170
DESN 512393 C
DESN 512400 A
Fig. 15.1
Fig. 15.2
Fig. 15.3
