6
SAFETY INFORMATION
EMC Information
Essential performance of MX-22 and MX-24 is to display images and operate functions normally.
CAUTION
The MX-22 and MX-24 requires special precautions regarding EMC and need to be installed,put into service
and used according to the following information.
Do not use any cables other than the cables that provided or specified by us. Using other cables may
cause the increase of emission or decrease of immunity.
Do not put anyportable and mobileRF communications equipment close to the MX-22 and MX-24. Doing
so may affect the MX-22 and MX-24.
The MX-22 and MX-24 should not be used adjacent to or stacked with other equipment. If adjacent or
stacked use is necessary ,the equipment or system should be observed to verify normal operation in the
configuration in which it will be used.
Anyone who connects additional equipment to the signal input part or signal output parts,configuring a
medical system, responsible that the system complies with the requirements of IEC/ EN60601¬1¬2.
Guidance and manufacturer’s declaration – electromagnetic emissions
The MX-22 and MX-24 is intended for use in the electromagnetic environment specified below. The
customer or the user of the MX-22 and MX-24 should assure that it is used in such an environment. Not
Life-supporting Medical Equipment.
Emissions test
Electromagnetic environment – guidance
Harmonic emissions
IEC/EN61000-3-2
Class A
The MX-22 and MX-24 is suitable for use in all
establishments,including domestic establishments
and those directly connected to the public low-voltage
power supply network that supplies buildings used for
domestic pur poses.
Voltage fluctuations
/
flicker emissions IEC/
EN61000-3-3
Class A
