AG Neovo MX-22 User Manual Download

Page: 44 / 52

ADJUSTING THE LCD DISPLAY

Item

Function

Operation

Range

MODE

Sets the current mode for better image
display.

Touch the

button to

select the setting.

TEXT

GRAPHIC

Note:

This menu option is only available if the input source is VGA with the resolution is

either of the following: 640 x 350, 640 x 400, 720 x 350, or 720 x 400.

For optimal performance, select:

•

TEXT

- This mode is suitable for viewing text documents when the resolution is

720 x 400 or 720 x 350.

•

GRAPHIC

- Graphics mode is suitable for viewing images when the resolution is

640 x 350 or 640 x 400.

DDC/CI

Activates the DDC/CI protocol to allow users
to configure the monitor by a software using
two wires on the VGA or DVI cables.

Touch the

button to

select the setting.

OFF

DCR
(Dynamic
Contrast Ratio)

Activates DCR. This feature provides
automatic adjustment of picture brightness
and contrast at high speed and dynamic
contrast range, such as when watching
movies. DCR is suitable for indoor viewing.

BLUE
SCREEN

Enables or disables the blue screen feature.
If the setting is set to

, it displays a blue

screen when no signal is available.

SIGNAL INFO

Enables or disables the signal information to
be displayed on the screen.

HDMI CEC

Enables or disables the HDMI CEC feature.
If the setting is set to

, you can control the

connected HDMI CEC-compatible device on
the same power on or power off status.

Note:

This menu option is only available if

the input source is HDMI.

LOGO

Enables or disables the logo feature.
If the setting is set to

, the AG Neovo

logo is briefly displayed after the display is
powered on.

RECALL

Use to recall all to default settings, except
Language, PIP, and the input source.

Touch the

button to

execute the function.

Summary of Contents for MX-22





















































Search results

Summary of Contents for MX-22

Reviews:

Related manuals for MX-22

Brands by name

Popular brands

AG Neovo MX-22, User Manual

Search results

Summary of Contents for MX-22

Reviews:

Related manuals for MX-22

Brands by name

Popular brands