13
PRECAUTIONS
Notice for the LCD Display
Use a power cord that matches the voltage of the power outlet, which has been approved and complies
with the safety standard of your particular country.
The single device output analog signals through ADC element (Analog DigitalConvert) conversion to
become a digital signal and the video signal is via Video Decorder conversion. It has become the same
digital signal, these signals via Scaler IC as zoom in or out action and digital image processing, then
through the cable line transmission LVDS signals to one of the LCD module. The last by the clock controller
(Timing Controller, TCON), the clock signal is transmitted to the drive IC on the panel and turn on Backlight
for LCD module light source by Scaler control.
WARNING
– No protection against the ingress of water : IPX0
WARNING
– Do not modify this equipment without authorization of the manufacturer.
Installation and OSD adjusting should only be carried by manufacturer trained and authorized personnel.
WARNING
– To avoid risk of electric shock, this equipment must only be connected to a supply mains with
protective earth.
CAUTION:
This adapter Manufacturer/model is a forming part of the medical device.
♦
Power by class I power supply.
♦
Adapter manufacturer/model:.
ADAPTER TECH: ATM065-P120/ATM065T-P120
Input/output: 100-240V~50-60Hz, 12V(
) 5A.
EDAC TECH:EM10681G
Input/output: 100-240V~50-60Hz, 12V(
) 4.16A.
WARNING:
Use suitable mounting apparatus to avoid risk of injury.
WARNING:
The equipment not suitable for use in the presence of a flammable anesthetic mixture with air
or with oxygen or nitrous: Not AP or APG Category
CAUTION:
No applied part.
Make sure the user not to contact SIP/SOPs and the patient at the same time.
CAUTION:
Transport should only be undertaken in a flat surface.
