STEP 7
Position Poolsolar headers onto support angle
(I). When the solar collectors are unrolled you should see
the word ‘POOLSOLAR’ on the bottom manifolds (M).
Using the electrical a tie-wraps provided (J) connect the
header to support angle every 66 cm.
I
66 cm
66 cm
J
Tie-wrap
Support Angle
STEP 8
Apply an adhesive (K) bead every 50 cm to the
roof structure and unroll the Poolsolar matting. It is also a
good idea to apply adhesive down the very edge of the
matting (L).
50 cm
Adhesive Bead(s)
K
L
M
STEP 9
Apply a support (M) angle to roof
structure to support the bottom headers.
Secure headers to support angle with tie-
wraps as per step 7.
STEP 10
Repeat above procedure to add
additional Poolsolar Matting.
Proceed to Page 8 for plumbing
connection.
Tie-wrap
6
Summary of Contents for Poolsolar
Page 1: ...Poolsolar Installation Guide...
Page 18: ......
