manualshive.com logo in svg

AFRISO SonarFox UST 20, Operating Instructions Manual

Share
Download
AFRISO SonarFox UST 20 Operating Instructions Manual Download Page 21

21

AFRISO 

SonarFox UST 20

RESET

Complete restart of the level meter. The same effect has also a 

 

short-time interruption of the supply voltage.

MEDIUM TEMPERATRE

FAILURE MODE

HART

FACTORY DEFAULT

RESET

RESET:

            ARE YOU SURE?

During the restart process, "RUNNING" 

will be displayed. Then the level meter 

will be automatically turned off and on.

8 .2 .  Additional fuctions

Additional functions include modes to display temperature in the tank or to find out the actual 

flowing current in the loop. Besides, to lock modifications using a password and information about 

the level meter version. All of the functions are accessible from the main menu.

DIAGNOSTICS

It contains information about DISTANCE TO LEVEL, TEMPERATURE 

and CURRENT.
DISTANCE TO LEVEL: Shows the current distance value to the me

-

dium surface.

TEMPERATURE: Shows the actual temperature in the tank
CURRENT: Contains information about the actual current value in the 

loop.

BASIC SETTINGS

SERVICE

DIAGNOSTIC

CLONE SETTINGS

PASSWORD

LANGUAGE

INFO

DISTANCE TO LEVEL

TEMPERATURE

CURRENT

DISTANCE TO LEVEL

            01220 mm

The temperature is measured inside 

the tank where the level meter is in-

stalled.

If the temperature of the measured me-

dium is different, we recommend you to 

carry out the temperature compensa-

tion "MEDIUM TEMPERATURE" be

-

cause of accuracy. IThen the displayed 

temperature is an average value from 

the temperature set in the "MEDIUM 

TEMPERATURE" and the current tem

-

perature measured by the sensor.

DISTANCE TO LEVEL

TEMPERATURE

CURRENT

TEMPERATURE

            ARE YOU SURE?

DISTANCE TO LEVEL

TEMPERATURE

CURRENT

CURRENT

            ARE YOU SURE?

Summary of Contents for SonarFox UST 20







































Reviews:

No comments

Brands by name

Popular brands

Load more brands