19
Selection criteria
EN
RF ... EX / KP ... EX / PF ... EX
5.3
Ambient conditions
5.3.1
Mechanical shocks
1. If the installation point is subject to mechanical shocks, install the pro-
duct in a separate location and connect it by means of flexible lines.
5.3.2
Vibrations
Vibrations are be indicated by ongoing and frequently unsteady vibrations
at the tip of the pointer.
The installation site of the product is subjected to mechanical vibra-
tions.
1. In the case of heavy or unsteady vibrations at the installation point,
install the product in a separate location and connect it by means of fle-
xible lines.
NOTICE
DAMAGE TO THE PRODUCT
•
Verify that the product is not subjected to mechanical shocks.
Failure to follow these instructions can result in equipment damage.
NOTICE
DAMAGE TO THE PRODUCT
•
Verify that you use a product with filling.
Failure to follow these instructions can result in equipment damage.
Summary of Contents for KP EX Series
