9
2.5. Flowmeter Date and Time Correction
2.5.1. To adjust date and time you shall select and activate
Settings / System
settings / Time settings / Date
(
Time)
, and then using buttons
,
set the cursor
to "day", "month", "year" ("hours", "minutes", "se-
conds") positions. Using buttons
0
…
9
or
,
modify selected
setting value in each position. Press button
to enter the setting val-
ue, and to cancel entering (to return to previous value) press button
.
2.6. Setting Transition to "Daylight Saving" / "Standard"
Time Mode
2.6.1. The flowmeter is capable of setting the device clock to "Daylight Saving"
/ "Standard" time automatically. The user can:
- Set the device clock transition mode
- Turn off the device clock transition functionality.
Two device clock transition modes are provided: standard and us-
er-defined.
In standard mode, the transition to "daylight saving" time takes
place at 2:00:00 a.m. of the last Sunday of March the clock being put
one hour forward, and to "standard" time at 3:00:00 a.m. of the last
Sunday of October the clock being put one hour back. In user-defined
mode, the user can set the transition time. In case the transition func-
tionality is turned off the device clock keep time countdown according to
"standard" time only.
2.6.2. To set the transition mode, activate
Settings / System settings / Time
settings / Time mode change / Mode
option and select one of the fol-
lowing values:
standard
or
user-defined
.
In the Standard mode, you may see the date and time of automatic
transitions to "daylight saving" and "standard" time in
Daylight saving
time
and
Standard time
windows, respectively.
In the User-defined mode, you can set time of transition to "daylight
saving" and "winter" time in
Daylight saving time
и
Standard time
windows, respectively, following instructions in p.1.2.2.
If
Mode
setting is set to
no change
then
Daylight saving time
and
Standard time
menu items become unavailable.
2.7. Setting KC and Kp factors
2.7.1. The
KC
(
Kp
) factor is calculated in
Settings / Periphery settings /
Universal output
X
(Type frequency) / Setup / FREQUENCY
OUTPUT
X
(
PULSE OUTPUT
X
) menu.
To calculate the
KC
factor, open
FREQUENCY OUTPUT
X
menu
and first enter
Qut
,
Qlt
и
Fmax
values according to p.1.2. After that, us-
ing buttons
,
align
KC calcul.
…
line with the cursor
and
Summary of Contents for UF-5 Series
