Confirming the Installation Environment and Location to Install the Machine
- 15 -
Installation Space
Select an installation location that is level and can support at least 65 kg (143 lbs.)*.
* Including the print cartridge and other consumables.
Install the machine near a power socket. Also, install the equipment so the power socket is within
easy reach so the power plug can be pulled out in an emergency.
Leave open space on all four sides and above for access.
For safety, the unwinder should not hang over the edge of any support.
To install the printer and the unwinder on a stand or table, it must be at least 1050 mm (42 in) wide and
500 mm (20 in) deep. If you install the printer and the unwinder on a surface that is too small, they may
fall off or be a safety hazard if they are hanging over the edge.
Install the equipment according to the equipment installation space shown in the diagram. Sizes are the
minimum space needed.
700 mm
(27.5 in)
= open space
1050 mm (42 in)
No
overhang!
Open Cover
400 mm
(15.7 in)
440 mm
(17.3 in)
500 mm
(20 in)
