Test Printing
- 28 -
Test Printing
Load a roll of paper (regular continuous
paper, 130-mm wide) on the unwinder.
Refer to the "User's Guide" for the
procedure to set paper.
Press the <POWER> button on the
control panel to turn on the printer's
power.
Press the scroll button
▼
several times,
to select [Calibration], and then press
the <OK> button.
Press the scroll button
▼
several times
to select [Adjust Density], and then
press the <OK> button.
Check that [Execute] has been selected,
and press the <OK> button.
Press the scroll button
▼
several times,
and when [Print Information] appears,
press the <OK> button.
Press the scroll button
▼
to select
[DEMO Page], and then press the <OK>
button.
Check that [DEMO1] has been selected,
and press the <OK> button.
Paper feeds and a demo page is printed.
If the paper does not feed well, the
print out is strange, or something else,
confirm that the printer is installed
correctly.
Adjusting Density and Test
Printing
1
2
3
6
7
4
8
5
