Afikim afiscooter-s, Service Manual

Page: 31 / 37

Service Manual AFISCOOTER S v.1.9
Ver. 01
31
no
yes
no
yes
yes
yes
yes
yes
yes
yes
no
no
no
no
no
no
OK
Not OK
yes
no
Choose the proper option -
Drive and Display faults
Display not working
Scooter does not drive
Display ON
No drive
Code = bars up and
down
Connect
programmer to
read fault log, check
another controller
Display has flash
code?
Code = 1 or 10
10
Code = 2 or 3
Code = 6
Code = 7
Code = 8
Code = 9
Finish
Throttle or
potentiometer not in
neutral condition
Batteries voltage too high
or low respectively; check
batteries and charger
Motor wires shorted
or disconnected
check and repair
EMB manual lever
released or micro-switch
or panic sensor or electric
release switch
Possible faulty
potentiometer
Possible faulty controller ,
check replacement
Possible EMB faulty,
check replacement
Check all wiring
Check power supply to front board
and controller
Check main fuse
Check key switch
Check 24VDC in
controller and
front board
Check replacement front board
System OK
Check replacement controller
Scooter drives but stops
unexpectedly with fault Code
Always check wiring and connectors!
Always re-install original part if problem not solved!
Afiscooter S
Check batteries' terminals