25
42.
Before installing the aFe Scorpion Grille, install the supplied power harness. The Red wire
goes on the positive battery terminal (+) and the black wire goes on the negative battery
terminal (-). You will need to mount the switch inside the cab or to an available prewired
switch. Use four (4
) 8”
cable ties to secure the wiring loom to the vehicle.
Note: The picture above is only a suggestion on how to run the wiring loom.
Summary of Contents for Scorpion 79-21002L
