![background image](http://html.mh-extra.com/html/afe-power/scorpion-79-21002l/scorpion-79-21002l_instruction-manual_2864094025.webp)
24
39.
Lay the active grille assembly over the aFe Scorpion Grille and center. Make sure that when
you are laying the active shutter grille over the aFe Scorpion Grille, the metal tabs on the
top (of the aFe Scorpion Grille), go over the active shutter grille.
40.
Attach the active shutter grille to the aFe Scorpion Grille using two (2) supplied 10-32 nylon
locknuts and two (2) supplied #10 washers on the top studs. Use the two (2) supplied 1/4-
20 X 3/4" hex screws, two (2) supplied 1/4" washers, and two (2) supplied 1/4" nylon
locknuts at the bottom (top photo). Tighten all hardware.
41.
At the top of the active shutter grille use the four (4) supplied 1/4-20 X 3/4" screws, four (4)
supplied 1/4" washers, and four (4) supplied 1/4" nylon locknuts (bottom photo). Tighten all
hardware.
Summary of Contents for Scorpion 79-21002L
