![background image](http://html.mh-extra.com/html/afe-power/77-86004/77-86004_instruction-manual_2864110004.webp)
Page 4
Refer to Figure A for Step 1
Step 1: Before installing your aFe POWER
module, you will have to place your vehicle’s ECU in sleep mode.
In order to do this, you will need to do the following:
•
If the engine is cold: open the hood, close the doors, lock the car and wait 30 seconds.
•
If the engine is warm: open the hood, close the doors, lock the car and wait 20 minutes.
•
If the engine is warm and you can’t wait 20 minutes: disconnect the battery.
Figure A
2
1
REMOVAL