Afag SA-1 Series, Manual, Page: 22 / 40

SA-1-OI-vers. 2.2 gb.23.07.14
NOTE
Other Controls information Take them in the technical product from
catalogue (capter controls).
www.afag.com
2.2.6 Programming the SA spindle extension
CAUTION
Caution: The SA spindle extensions should be started up in set-
up or jog mode. A wrong programming may trigger uncontrolled
movements of the SA spindle extensions. Fast or unintentional
movements of the module can result in personal injury and
damage to property.
The programming depends on the control system used. Observe the respective
manuals of the control system supplier.
If the Afag SE-Power control system is used, please observe the Montage
Instructions which are added to the control system.
The Montage Instructions can also be downloaded from the Afag homepage
www.afag.com .
NOTE
If wrong basic data is input at the PLC the SA spindle extension may
move unhindered against the stopper leading to injury to persons by
parts flying around.
In case of a failure of the displacement encoder or a defective limit
switch cable the SA spindle extension may execute unexpected
movements. Persons working on the system may be injured.
CAUTION
It is the responsibility of the system manufacturer to ensure that
the system is protected with a protective device so that persons
are not injured during operation.
22