Afag CS 6, Translation Of The Original Montage Instructions

Page: 19 / 30

CS6-BA-vers.1.7 gb. 20190312
19
3.2.0 Preparation for start-up
If they put before the introduction only shock absorber, so that slide is absorbed in
position.
CAUTION
The CS module must not be operated without shock absorbers
installed as it may be damaged due to missing damping.
NOTE
Elastomer shock absorbers are actually a spring element, i.e. the
holding force of the carriage is more or less reduced in the end
position as compared with hydraulic dampers and depending on the
setting of the absorber stroke.
Air connection M3
Air connection M3
Shock absorber