Afag CS 6, Translation Of The Original Montage Instructions

Page: 23 / 30

CS6-BA-vers.1.7 gb. 20190312
23
3.2.4 Starting up the module CS
Set before start until the stop screws, and then the sensors
Start-up of the CS compact slide
 Aerate the total system slowly.
 Pay attention to the permissible values (technical data) regarding:
- load capacity
-
motion frequency
- moment loads on the guide system
CAUTION
Limbs may be squeezed by moving components.

Make sure that there are no persons or tools within the operating range of the
module.
 Carry out a test run
- at first at slow traverse speed,
- afterwards under operating conditions.