Afag CS 6, Translation Of The Original Montage Instructions

Page: 14 / 30

14
CS6-BA-vers.1.7 gb. 20190312
3.1.3 Scope of Supply
Description
1 Module CS 6
2 Centering bushings Ø5x2.5 mm
2 Special screw M3x14.8/4 mm
2 Special screw M3x16/6 mm
2 Threaded pins M3x3 mm
3.1.4 Designated use
The series of the compact slides CS-Modules is used for the linear movement of
rigidly mounted loads in non-explosion harzadous ambient and operating conditions
that are specified for this Module; see catalogue.
NOTE
Montage Instructions should be read carefully before carrying out
any activity on or with the module.
The module may only be deployed in accordance with the intended
use.
Modifications on the module that are not described in these Montage
Instructions or have not been approved in writing by Afag are not
permitted. In case of improper changes or assembly, installation,
operation, maintenance or repairs, Afag rejects all liability.
CAUTION
Connection of compressed air and operation of pneumatic
systems may cause unpredictable movement which may result
in personal injury or damage to property.
When connecting compressed air for the first time make sure that all air chokes are
closed. Ventilate the system slowly.