Afag 50386049, Assembly And Operating Instructions Manual

Page: 24 / 48

Installation, assembly & setting
24 – 48 Assembly instructions EN

CS 6/20 - CS 6/40

Date 01.06.2021

Version 2.0
6 Installation, assembly & setting
This chapter contains specific safety instructions and information regarding
proper installation, assembly and setting of the compact slides including their
connection to the control unit and the pneumatic system.
6.1 Safety Instructions for installation and assembly
Also observe the safety instructions in

Chapter 2 „Safety instructions“ in
this manual.
6.2 Installation and assembly
6.2.1 Assembly and attachment
The compact slides can be mounted both in horizontal and vertical position.
CAUTION
Danger of injury when connecting the compact slide to the control unit
and the compressed-air system!
When connecting the compact slides to the control unit or the compressed-
air system sudden, unpredictable movements may occur which can cause
personal injury or property damage.

Installation may only be carried out by a qualified specialist!

Read carefully the assembly and safety instructions before working with or
on the compact slides.
CAUTION
Danger of injury when handling the compact slides!
Careless handling of the compact slides can cause personal injuries and
damage to the modules.

Only qualified personnel may work with or on the module!

Observe the assembly instructions!
NOTICE
No liability for damages can be assumed for damages caused by improper
installation/assembling work on the part of the operator.
CAUTION
Risk of injuries due to uncontrolled parts movements!
When installed in a vertical position, unexpected movements may occur if the
compact slide is not in its lowest position.

When installing in a vertical position, always move the slide to the lowest
position before mounting.