Afag 50386049, Assembly And Operating Instructions Manual

Page: 8 / 48

Safety instructions
8 – 48 Assembly instructions EN

CS 6/20 - CS 6/40

Date 01.06.2021

Version 2.0
2 Safety instructions
2.1 General
This chapter provides an overview of all-important safety aspects to ensure safe
and proper use of the compact slide and optimal protection of personnel.
Failure to follow the directions and safety instructions given in this instructions
manual may result in serious hazards.
2.2 Intended use
The compact slide CS is used for shock-free linear movement of fixed loads in
the ambient and operating conditions defined for this module.
The CS compact slides are designed exclusively for linear movement in any
position on the slide for load capacities up to a maximum of (CS 6/20 = 0.1 kg),
(CS 6/40 = 0.1 kg). Load capacities at the front of the modules (CS 6/20 = 0.08
kg) (CS 6/40 = 0.08 kg).
The CS compact slides can be used in combination with other modules as a
pick-and-place station, whereby the permissible load capacity must not be
exceeded.
Any use of the compact slide beyond the described purpose is considered to be
not in accordance with the intended use.
The intended use of the module also includes:

observance of all instructions given in this instructions manual.

compliance with the inspection and maintenance work and the
specifications in the data sheets,

using only original spare parts.
2.3 Foreseeable misuse
Any use other than or beyond the intended use described above is considered
a misuse of the compact slide.
Especially the following use is considered a misuse:

Use in potentially explosive atmospheres.