Aethra Maia XC, Use And Installation Manual

Page: 42 / 56

42
Moving around within the programmes
Inside the programmes it is possible to activate the various functions using:
• The function-keys that appear in the apposite bar (see § “The Button Bar”);
•
The arrow pointer can be managed: from the GUI in combination with the OK key,
> from the MOUSE – if this has been installed (recommended),
> from the system KEYBOARD – to move the pointer:
a) press the function-key “ Pointer ” (to activate the function),
b) use the arrow-keys to move the pointer;
To run the cursor through the vertical slide bar, proceed as follows:
With the arrow-keys on the keyboard
1. Place the pointer in the non-active part of the bar, see
example on the right;
2. press OK.
With the mouse
1. Place the pointer in the non-active part of the bar, see
example on the right;
2. Click with the left mouse button;
or
1. Place the pointer on top of the cursor;
2. Hold down the left button of the mouse and drag the cursor
to the desired position.
Cursor
Pointer