AES uScope Manual
www.AESwave.com
Copyright 2011 by Automotive Electronics Services, Inc.
Page 8
Main Menu
“.V”
Voltage and Vertical setting Menu
Highlight the
“V.” menu item and press “OK” to open the menu.
V/Div
(Voltage per division setting)
Highlight V/Div
Use LEFT/RIGHT to select desired Volts per division
Press
“OK” when complete to close menu
Gnd
(Ground position)
Highlight
“Gnd”
Use the LEFT/RIGHT to move the vertical position of the waveform. Note: that
left arrow moves waveform down and right arrow moves it up.
Note: The horizontal grid line will always reference 0 volts.
Press
“OK” when complete to close menu
Invert
(Inverts waveform on display, ideal for secondary ignition.)
Highlight Invert
Press LEFT/RIGHT arrow key
Note: the bottom right of the screen will indicate if invert is on or off
o
The following will be displayed at the button right of the screen if invert is
on:
INV
Press
“OK” when complete to close menu
Ref Vert Pos
(Reference Vertical Position)
Highlight Ref Vert Pos
Use the LEFT/RIGHT to pick the desired position of the reference waveform.
Press
“OK” to exit the menu
“.T”
Time and Horizontal Setting Menu
Highlight
the “.T” and press “OK” to activate the menu.
T/Div
(Time per division Settings)
Highlight
“T/Div”
Use LEFT/RIGHT to select the time division setting
Press
“OK” to exit menu
Horz Pos
(Horizonal Postion)
Highlight
“Horz Pos”
Use LEFT/RIGHT to select the desired Horizontal Position
Press
“OK” to exit menu
“Tr”
Trigger and Display Mode Menu
Highlight
the “Tr” and press “OK” to activate the menu.
Tr. Disp Mode
(Trigger Display Mode)
Highlight
“Tr.” Mode
Use LEFT/RIGHT to select the desired trigger display mode
Trigger mode is indicated at the top Left of uScope screen
Press
“OK” to exit menu