AES uScope Manual
www.AESwave.com
Copyright 2011 by Automotive Electronics Services, Inc.
Page 4
Main Buttons
[On/Off]
Turn uScope on or off
Slide switch located on bottom right side of uScope
[A]
Two actions
1. Quick press
A quick Press
of “A” will switch between “stop” or “run” of
the waveform.
2. Long Press
Hold for 1 full second (or until the screen changes) to
switch between the Main Menu or the Grid Value
displays.
For further instructions on saving an image or setup, refer
to the manul.
[B]
Save Button (Located on the right)
Press and hold
“B”,
while in grid value mode
and in measurement menu
“ME”,
to save an image of the screen.
[Arrows]
Navigation (located on right side of the front
face)
When the Main Menu is visible:
o
Up and down arrows: move between main menu and
menu items
o
Left and right arrows: make adjustments/selections for
the currently highlighted menu item.
[OK]
Select menu Items
(“OK” = menu)
When the Main Menu is visible, “M” will open or close the currently selected menu item.
For example, when “Tr” is highlighted, press “OK” to open the “Tr” menu item. Press “OK”
to close it.
Long Press
“OK”
When a menu item calls for a selection, a long press of
“OK” will close the window and
select the action.