OWNER’S MANUAL SUPPLEMENT
- Fan Speed Toggle Switch –
Read and follow all instructions in the Owner’s Manual.
Turn the Power ON / OFF switch to ON.
The toggle switch beside the Power ON /
OFF switch is used to control the speed of
the unit’s fan. Flip the switch to “High” to run
the unit at maximum air movement. Flip the
switch to “Silent” to run the fan at a lower
volume for a quieter mode of operation.
TOGGLE SWITCH
POWER SWITCH
VA-00808 65-00588
SILENT
ON
OFF
HIGH
6
1 . Remove 8 bolts to disassemble the
backing from the ventilation panel .
2 . Remove screws holding the ActivePure®
Cell in place .
3 . Slide the used cell out and discard .
4 . It is recommended maintenance to
vacuum off the vent openings and clean
the underside of the unit if any dust
build-up has accumulated .
NOTE:
A face mask should be worn to
prevent inhalation of any particles
released into the air during the
process . Eye protection may be
necessary when cleaning the unit
from below while it is mounted in
the ceiling .
5 . Slide the new ActivePure® Cell into place .
Replacement part:
ActivePure® Cell (Ozone-Free)
Item # 49785
6 . Reinstall the screws securing the
new cell into position .
7 . Replace the backing using the
same 8 bolts previously removed .
8 . Mount unit back into ceiling .
9 . Reconnect Power Supply connections
and turn the Power Switch on .
ActivePure Cell
Power Switch
Toggle Switch
SERVICE & MAINTENANCE
Service should only be performed by a qualified electrician.
Make sure the
Power Switch is turned off and wiring is disconnected prior to handling .
WARNING:
