66
1. Gather the (4) 8-32 wing mounting bolts, (4) #8
large rubber backed washers and (4) hair pins.
Note:
Always check wing attachment bolts are
securely tightened. We recommend using
hair pins through the aluminum anti-rotation
dowels for a second method of security.
PRE-FLIGHT PREPARATION
2. Slide the wing tube in the fuse wing tube sleeve.
Slide the wings on the wing tube and plug in the
aileron servo connectors. Slide the rubber
backed washers on the wing mounting bolts and
insert bolts through the fuse side and into the
wing root blind nuts. Tighten snugly but do not
over tighten and crack the fuse or wing root
wood.
3. Gather the (4) 4-40 stab mounting bolts and
(4) #6 small rubber backed washers.
4. Slide the stab tubes in the fuse stab tube sleeves
(
short tube front, long tube rear
). Slide the
stabs on the stab tube and plug in the elevator
servo connectors. Slide the rubber backed wash-
ers on the stab mounting bolts and insert bolts
through the stab mounting tabs and into the fuse
blind nuts. Tighten snugly but do not over
tighten and crack the stab mounting tabs or the
fuse sides.
We recommend using hair pins through
the anti-rotation dowels for a second
method of wing attachment.
If you do not remove your stabs for transportation
purposes. We recommend you use (blue) Loctite to
help keep bolts from vibrating loose.
We recommend checking the stab
mounting bolts after each flying
session
