22
11. Attach a Zip-Tie to the lower wing tightening
dowels as shown below. Evenly tighten both the
upper and lower ties making sure that the wing
stays aligned.
Note:
Make sure wings are aligned at both the lead-
ing edge and trailing edge.
10. Slide the included wing tightening dowels into
the holes drilled for the wing mounting bolts as
shown below. Attach a Zip-Tie around the dow-
els as shown, do not fully tighten until the next
step.
12. Use Rubbing alcohol to wipe away any excess
epoxy that has gotten onto the wings surface
during assembly Let the wing set until the glue
is fully cured.
