60
17. Remove wing and gather the wing bolt guide
tubes and slide them into the precut holes as
shown below.
19. Mark guide tubes flush with top of air scoop.
Remove guide tubes and use a saw or a rotary
cutting tool to remove excess guide tube.
Note:
Mark guide tubes Right/Left to ensure correct
installation.
18. It will be necessary to sand the tubes so they fit
the taper of the wing and flush to the top of the
reinforcement discs as shown below.
20. Place masking tape over holes and cut away tape
from guide tube holes with a hobby knife.
Note:
Masking tape will help protect paint when
sanding tubes flush to scoop.
