19
14. Also check for proper operation of the retract-
able tail-wheel assembly and doors at this time.
Note:
It is best to check air system at this time be-
fore going forward with any further assembly.
13. Attach the airlines to their respective connectors
and pump the system with air
( 100PSI MAX)
.
This will be your last time to check for air leaks
in the retract system before the wings are joined.
Caution:
Manually operate gear and gear door
valves to ensure the valves do not leak.
Take care not to crush inner gear doors
with gear when testing.
We recommend
removing inner doors during testing
and assembly.
Wing Panel Assembly
Gather the wing joining supplies shown below:
•
30 or 45 Minute Epoxy-
Not Supplied
•
Mixing Cup/Sticks-
Not Supplied
•
Nylon Zip Ties
-Supplied
•
Tightening Dowels
-Supplied
•
Plywood Wing Joiner
-Supplied
1. Mark the wing joiner as shown below. This will
aid in correctly positioning the wing joiner when
gluing.
