Aeroworks 30cc Freestyle Extra 260 Assembly Manual
45
4. Slide the bottom inner SFG in place, ensuring
that the top SFG’s mounting tab keys into the
matched slot in the lower SFG.
2.
The inner SFG’s are held in place using one 4-
40 mounting bolt. The top inner SFG mounting
tab will pass through the wing and will secure to
the bottom inner SFG.
3. Place the top inner SFG into the precut slot in
the wing as shown below.
5. Secure the inner SFG’s with a 4-40 bolt and
bonded washer as shown below.
6. Repeat inner SFG mounting steps for the re-
maining wing.
7. Finished inner SFG mounting shown below.
8. Mount the outer SFG using the supplied 4-40
mounting bolts and #6 bonded washers.
Inner Top SFG
Inner Bottom SFG
