Aerotech Ndrive QL Series, Hardware Manual

Page: 11 / 50

Ndrive QL Hardware Manual Quick Installation Guide
Quick Installation Guide
This chapter describes the order in which connections and settings should typically be made to the Ndrive
QL. If a custom interconnection drawing was created for your system (look for a line item on your Sales
Order under the heading “Integration”), that drawing can be found on your Software or Documentation DVD.
J104
J105
High Voltage
DANGER!
FIREWIRE
S1
DEVICE
NUMBER
ON
0
1
2
3
4
5
STAGE
J106
SYNC
J103
PWR ENB/FLT
POWER INPUT
AC1
AC2
AUX I/O
J108
TB101
100-240V~
50/60Hz
2A MAX
ANALOG
I/O
J107
A B
2
3
1
5
Set the Communication Channel Device Number (S1)
Connect to the Firewire (J104 and J105).
Connect any additional I/O as required (not shown, user-specific).
Connect to the Power Input (TB101).
1
3
Connect to the Stage (J106). 2
4
5
Figure 1: Quick Start Connections
Topic Section
Connect to J106 Refer to Section 2.3.
Set the Device Number Refer to Section 2.2.3.
Connect the FireWire Refer to Section 2.6.1.
Connect to TB101 Refer to Section 2.2.1.
Connect to J107 Refer to Section 2.5.
Connect to J108 Refer to Section 2.4.
www.aerotech.com 11