1.2.4. OEM Mounting
OEM Mounting Procedure:
1. Secure the seven M3 standoffs to the mounting surface with M3 hex nuts. These hex nuts are not
included with the drive.
NOTE
: Do not install the standoffs to the mounting surface with the drive already attached.
2. Attach the drive to the standoffs with the M3 screws. These screws are included with the drive.
Table 1-5:
OEM Mounting Parts
Aerotech P/N
M3 Threaded Hex Standoff, 10 mm length
EIH01181
M3 Philips Pan Head Screw, 8 mm length
HCY0003008
1.2.4. OEM Mounting
iXI4/XI4 Hardware Manual
28
www.aerotech.com
