Maintenance
ASR1200 Rotary Stage User's Manual
7. Lubricate the new seal with a generous amount of Parker O-Lube and press it uniformly into its housing.
8. Reattach the seal retainer to the end cap and tighten all screws in a cross pattern.
9. Apply Parker O-Lube to the exposed end of the rotary union shaft shown in Figure 4-8.
10. Press the seal assembly back over the rotary union shaft. Use care so that damage does not occur to
the newly installed seal.
11. Tighten the seal assembly screws and reattach the cover and fitting.
12. Restore power to the stage.
28
Chapter 4
www.aerotech.com
