16
Don’t forget to install the nosecone before raising the wing up on the trike.
Figure 44
Figure 45
Along the left leading edge:
Open the main sprog access zipper and look inside, making sure that the crossbar, the main sprog
and the main sprog wire are properly secured (fig. 46).
Check that the strut is properly secured, safety wire is engaged and the safety ring is installed (fig.
47).
Check the sprog hardware, and the sprog cable attachments at both ends of each sprog cable.
Close the main sprog access zipper.
Open the outer sprog access zipper and check the sprog hardware and the sprog cable
attachments at both ends of the sprog cable.
CAUTION
REMEMBER TO SLIDE THE NEOPRENE COVER BACK ON PLACE TO COVER THE JOINT.
CLOSE THE ACCESS ZIPPER.
Figure 46
Figure 47
At the left wingtip, with the left winglet removed:
Check that the tip folded batten is properly installed (fig. 48).
Check that the sail mounting strap is properly installed and secured with Velcro (fig. 49).
Install the winglet back on place.
Summary of Contents for Sting Ray
