Aeros Sting Ray, Owner'S And Service Manual

Page: 26 / 46

26
11. Undo the sail mount webbing Velcro and remove the sail mount webbing from the leading edge
end caps (fig. 66).
12. Detach the control frame from the keel tube.
Figure 67
13. Secure main sprogs from rotation with a
nut outside the main sprog threaded adjusters
(fig. 67). Remove main sprogs from the sprog
threaded adjusters. Detach the main sprog
wires from the main sprogs. Take the sprogs
out of the sail.
14. Rotate outer sprogs 180 deg. forward so, that they are pointing towards the nose of the wing.
Slide the sail along the keel tube forward (fig. 68). Bring the nose junction of the frame out through
the nose opening of the sail (fig. 69). Rotate outer sprogs 180 deg. rearwards so, that they are
pointing towards the outer part of the wing.
Figure 68 Figure 69
15. Lower the wing from the support on the ground.
16. Slide the sail rearwards and out of the frame completely. If you encounter resistance, stop and
find out what is hanging up.
17. If you need to send the sail to the factory for repair, remove the Mylar inserts and the
transverse battens. The Mylar insert is to remove from the front end of the Mylar pocket. It helps to