8
Figure 10
4. Lift the wing upright on the control bar. Try
to set the control bar on level ground.
5. Remove all Velcro ties and spread the wigs
a bit (Fig. 10).
6. Remove the leading edge / cross bar
protection bags from the wing. Remove the
protection bags from the control bar apex,
from the hang bracket and from the crossbar
central unit.
7. Attach the struts according to the markings. L-left, R-right marks must be on the control frame
side of the strut on top (Fig. 11 and Fig. 12).
Figure 11
Figure 12
8. Attach the bottom front wires and secure the nose catch of the bottom wires on the nose
junction channel using the clevis pin and the safety ring (Fig. 13).
Figure 13
9. Attach the wing part of the rescue system bridle as shown on the figures 14 and 15.