21
Figure 47
6. Undo the sail mount webbing Velcro and
remove sail mount webbing from the plastic
end at the rear leading edge (Fig. 47).
7. Remove a splint from the nut at the
crossbar / leading edge tube junction,
disassemble the junction and separate the
crossbar tube from the leading edge tube
(Fig. 48).
8. Slide the crossbar forward and out of the
sail (Fig. 49).
Figure 48
Figure 49
Figure 50
9. At the nose junction disconnect the
leading edge tubes from the nose plates
(Fig. 50).
10. Slide the leading edge tubes backwards
and out of the sail.
