12
Figure 21
Figure 22
Figure 23
Figure 24
4.1.10 Attach the kickstarter handle to the main pylon as shown on the figures (fig. 22 and fig. 23).
4.1.11 Install the propeller making sure that the logo is facing rearward (fig. 24). Tighten the propeller
bolts.
Now your trike is ready for attaching the wing.
4.2 Wing Assembly Procedure
The wing assembly procedure and all information regarding the wing are written in a wing Manual.
Please read it thoroughly and make sure it is clearly understood.
5. PREFLIGHT INSPECTION OF THE WING
Conduct preflight inspection of the wing before attaching it to the trike as written in a wing Manual.
The ultralight preflight inspection is written in section 7. FLIGHT PREPARATION
6. ATTACHING THE WING TO THE TRIKE
6.1. Check that the ignition switch and the key are in off position. Install the wing mount support on the
lower pylon as shown on the figures below (fig. 25 and fig. 26).
Summary of Contents for ANT-70
Page 2: ...2...
