AEROPRAKT-22LS Pilot Operating Handbook
A22LS-POH-04
44
9.6.3 Propeller removal
Before dismantling the engine from the aircraft remove the propeller as follows:
- remove the locking wire from the studs;
- undo nuts and remove the studs;
- Remove the propeller by pulling gently by its hub.
When installing the engine on the aircraft propeller should be installed in reversed order.
Locking of the nuts on the studs should be done in such a way that the wire prevents
loosening of the nuts. Disassembled propeller should be carried in a soft package.
9.6.4 Engine removal
See A22LS Airplane Maintenance Manual for S/N 270.
9.6.5 Aircraft assembling
Aircraft assembling must be done in exactly reversed order. When installing the horizontal
tail it is necessary to lead the trim tab control cable first through its conduit in the stabilizer.
All hinges and fittings must be cleaned and greased before assembling the aircraft.
