AEROPRAKT-22LS Pilot Operating Handbook
A22LS-POH-04
43
6. Disconnect the wing at its forward and rear attachment points.
After disconnecting the wings it is recommended to insert all the fasteners back and lock
them with safety wire or pins not to lose them. Also secure with safety wire the spherical
bearings in the forward and rear wing attachment fittings.
Fig. 19 Wing removal
9.6.2 Stabilizer removal
) as follows:
1. Disconnect the control cable from the trim tab arm.
2. Disconnect the rudder rod from the elevator arm.
3. Undo the nut from the rear attachment bolt
4. Unfasten the forward bolts of horizontal tail attachment to fuselage and remove the
stabilizer.
Insert all fasteners back and secure them.
Fig. 20. Disconnection of the horizontal tail
