34
Aeroneb
®
Solo System Instruction Manual
Table 3: Aeroneb
®
Pro-X troubleshooting
If this happens:
It could mean:
Try this:
The
30 Min.
or
Continuous.
LED
illuminates, but
aerosol is not
visible.
No medication in
nebulizer unit.
Refill medication
through filler cap
in the nebulizer
unit (see
Adding
medication during
nebulization
).
It may be time
to replace the
nebulizer unit.
See
Warranty
and
Life of Product
.
Refer to
Aeroneb
®
Solo
parts list.
30 Min.
or
Continuous
.
indicator does not
light when on/off
power button is
pressed.
There is no power
to the System.
Verify that AC/DC
adapter is securely
attached to control
module.
Rechargeable
battery is
depleted.
Recharge battery
(see
Recharging
the battery
).
The fault indicator
LED illuminates.
The control
module cable
is incorrectly
connected to
the nebulizer, or
electronics are
malfunctioning.
Verify that control
module cable
is correctly
connected to both
the nebulizer unit
and the control
module.
Summary of Contents for Solo System
