Aeroneb Solo System, Instruction Manual, Page: 38 / 56

32 Aeroneb
®
Solo System Instruction Manual
Cleaning of Pro-X Control Module
Cleaning of control module, control module cable, AC/DC
adapter and mounting brackets:
1.
Wipe clean with a clean cloth dampened with mild
detergent and water.
2. Check for exposed wiring, damaged connectors, or
other defects and replace control module if any are
visible.
3. Visually inspect for damage and replace the control
module if any damage is observed.
CAUTIONS
Do not autoclave.
Do not use abrasive or sharp tools.
Do not spray liquid directly onto the control module.
Do not immerse control module in liquid.